smartpro 1.5kva 1440w line interactive sine wave ups, extended-run & snmpwebcard options, 2u rack/tower, usb, rs232, epo, 120v model number: SMART1500CRMXL description tripp lite's smartpro compact rackmount uninterruptible power supply (ups) offers line interactive voltage regulation, network grade surge suppression and long lasting battery support for critical network hardware during blackouts and extended power failures. larger internal batteries and higher rated wattage makes these systems ideal for network and telecom wiring closets and other limited-space installations. runtime is expandable with optional bp48v48rt4u and bp48v24-2u reduced-depth external battery packs. SMART1500CRMXL 2u rackmount 1500va/1440 watt ups offers battery-derived sine wave ac output during power failures and extreme voltage variations. line interactive automatic voltage regulation (avr) provides two levels of voltage boost during brownouts and one level of voltage cut during overvoltage conditions to maintain regulated 120v nominal output over an input range of 83-145v. includes nema 5-15p input plug and nema 5-15r output receptacles. network management interfaces support simultaneous communications via usb port, db9 serial port and optional snmp/web management accessory card slot. optional snmpwebcard offers remote management and control of the ups via direct network connection. additional envirosense accessory, when used in conjunction with snmpwebcard reports temperature, humidity and status of up to two directly connected contact closure sensors. hid-compliant usb interface enables full integration with built-in power management and auto shutdown features of windows and mac os x. supports detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once. includes poweralert monitoring software with usb and serial cables. emergency power off (epo) interface. integrated 3-bank programmable pdu switching supports load shedding and remote-reboot of up to 3 individual connected devices. 3-stage metered current monitoring and battery charge status leds. utility power and voltage regulation leds. audible alarm. self-test. 4-post rackmount accessories included; 2-9ustand tower stands and 2postrmkitwm 2 post rackmount kit available. field-replaceable, hot-swappable internal batteries and external battery packs. attractive all-black color scheme. features tripp lite's smartpro compact rackmount uninterruptible power supply (ups) offers line interactive voltage regulation, network grade surge suppression and long lasting battery support for critical network hardware during blackouts and extended power failures larger internal batteries and higher rated wattage make these systems ideal for network and telecom wiring closets and other limited-space installations runtime is expandable with optional bp48v24-2u (limit 1), bp48v60rt-3u (multi-pack compatible) and bp48v27-2us (multi-pack compatible) external battery packs highlights 1.5kva / 1500va / 1440w line interactive 2u rack/tower ups, sine wave 120v output, corrects brownouts and overvotlages from 83v to 145v 0.96 power factor, front panel status leds extended runtime options up to 1440w 4 post compatible mounting accessories 97% line-mode efficiency, 3 switched load banks usb, rs232, epo and slot for snmpwebcard option 120v nema 5-15p input, 8 nema 5-15r outlets package includes smartpro compact rackmount ups system 4-post rackmount installation hardware usb and serial cabling 1 / 6
some external battery configurations require the use of tripp lite's external battery configuration software (see manual) SMART1500CRMXL 2u rackmount 1500va / 1440 watt ups offers battery-derived sine wave ac output during power failures and extreme voltage variations line interactive automatic voltage regulation (avr) provides two levels of voltage boost during brownouts and one level of voltage cut during overvoltage conditions to maintain regulated 120v nominal output over an input range of 83-145v includes nema 5-15p input plug and nema 5-15r output receptacles network management interfaces support simultaneous communications via usb port, db9 serial port and optional snmp/web management accessory card slot optional snmpwebcard offers remote management and control of the ups via direct network connection additional envirosense accessory, when used in conjunction with snmpwebcard reports temperature, humidity and status of up to two directly connected contact closure sensors hid-compliant usb interface enables full integration with built-in power management and auto shutdown features of windows and mac os x 97% efficiency in line power mode offers substantially lower operating costs than lower efficiency ups types supports detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once includes poweralert monitoring software with usb and serial cables emergency power off (epo) interface integrated 3-bank programmable pdu switching supports load shedding and remote-reboot of up to 3 individual connected devices 3-stage metered current monitoring and battery charge status leds; utility power and voltage regulation leds; audible alarm; self-test 4-post rackmount accessories included; 2-9ustand tower stands and 2postrmkitwm 2-post rackmount kit available field-replaceable, hot-swappable internal batteries and external battery packs attractive all-black color scheme specifications output output volt amp capacity (va) 1500 output kva capacity (kva) 1.5 output watt capacity (watts) 1440 output kw capacity 1.4 output power factor 1 nominal output voltage(s) supported 120v frequency compatibility 60 hz output voltage regulation (line mode) -14%, +8% output voltage regulation (battery mode) +/- 5% built-in ups output receptacles 8 5-15r outlet(s) built-in controllable switched load banks three switchable single-outlet 5-15r load banks output ac waveform (ac mode) sine wave output ac waveform (battery mode) pure sine wave 2 / 6
input rated input current (at maximum load) 12a nominal input voltage(s) supported 120v ac ups input connection type 5-15p input circuit breaker 15a ups input cord length (ft.) 10 ups input cord length (m) 3 recommended electrical service 15a 120v phase single-phase battery full load runtime (minutes) 6 min. (1440w) half load runtime (minutes) 14 min. (720w) expandable battery runtime extended runtime supported via optional external battery packs external battery pack compatibility bp48v24-2u (limit 1); bp48v60rt-3u (multi-pack compatible); bp48v27-2us (multi-pack compatible) dc system voltage (vdc) 48 battery recharge rate (included batteries) less than 3 hours from 10% to 90% replacement battery cartridge (internal ups battery replacement) rbc94-2u battery access front panel battery access door battery replacement description hot-swappable, user replaceable batteries voltage regulation voltage regulation description automatic voltage regulation (avr) maintains line power operation with an input voltage range of 83 to 145 overvoltage correction input voltages between 127 and 145 are reduced by 12% undervoltage correction input voltages between 96 and 108 are boosted by 12% severe undervoltage correction input voltages between 83 and 95 are boosted by 24% leds alarms & switches led indicators 5 leds indicate line power, battery power, overload, voltage regulation and battery low/replace status alarms audible alarm indicates power-failure, overload and low-battery conditions alarm cancel operation power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status switches 2 switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support nominal voltage selection 3 / 6
surge / noise suppression ups ac suppression joule rating 570 ups ac suppression response time instantaneous emi / rfi ac noise suppression yes physical installation form factors supported with optional accessories 2 post rackmount (2postrmkitwm); wallmount (2postrmkitwm); tower (2-9ustand) primary form factor rackmount ups / power module dimensions in primary form factor (height x width x depth / inches) 3.5 x 17.5 x 19 ups / power module dimensions in primary form factor (height x width x depth / cm) 8.9 x 44.4 x 48.3 rack height 2u secondary form factor tower (requires 2-9ustand ) ups / power module weight (lbs) 60 ups / power module weight (kg) 27.2 ups shipping dimensions (height x width x depth / inches) 9.2 x 24 x 20 ups shipping dimensions (height x width x depth / cm) 23.5 x 61 x 50.8 shipping weight (lbs) 70.7 shipping weight (kg) 32.1 cooling method fan ups housing material steel environmental operating temperature range +32 to +104 degrees fahrenheit / 0 to +40 degrees celsius storage temperature range +5 to +122 degrees fahrenheit / -15 to +50 degrees celsius relative humidity 0 to 95%, non-condensing ac mode btu / hr. (full load) 151.4 battery mode btu / hr. (full load) 544 ac mode efficiency rating (100% load) 97% communications communications interface usb (hid enabled); db9 serial; epo (emergency power off); slot for snmp/web interface 4 / 6
network monitoring port description supports detailed monitoring of ups and site power conditions poweralert software included communications cable usb and db9 cabling included watchdog compatibility supports watchdog application, os and hard-reboot restart options for remote applications line / battery transfer transfer time 5.5 milliseconds low voltage transfer to battery power (setpoint) 83 high voltage transfer to battery power (setpoint) 145 special features high availability ups features hot swappable batteries green & high efficiency features greater than 95% efficiency - green ups; individually controllable load banks certifications ups certifications tested to ul1778 (usa); tested to csa (canada); tested to nom (mexico); meets fcc part 15 category a (emi) warranty product warranty period (worldwide) 2-year warranty, 3 year with registration. note: registration is required for 3-year warranty. connected equipment insurance (u.s., canada & puerto rico) $250,000 ultimate lifetime insurance related items optional products model number description qty. snmpwebcard for remote monitoring and control via snmp, web, or telnet. 1 envirosense monitors temperature, humidity and contact-closure inputs. (requires snmpwebcard or switched pdu.) 1 2-9ustand enables tower placement of rackmount ups systems 1 2postrmkitwm enables 2-post rackmount or wallmount installation of select rackmount ups systems 1 watchdogsw watchdog service monitoring / reboot software 1 bp48v27-2us bp48v27-2us - 2u external 48v rack/tower battery pack for select tripp lite ups systems 1 bp48v24-2u bp48v242u - external battery pack for ups system 1 bp48v48rt4u shallow-depth external battery pack for ups systems 1 wext5-500-1500 5-year extended warranty - for smart line-interactive and online tower or rack models, 1500va or less 1 5 / 6
rbc94-2u 2u ups replacement battery cartridge for select tripp lite smartpro ups 1 pdub15 dual source power distribution unit / pdu with manual transfer switch enables hot-swappable ups replacement in critical network applications 1 pdu1215 basic pdu / power distribution unit - safe, reliable power distribution for critical networking equipment 1 pdunv basic pdu / power distribution unit - safe, reliable power distribution for critical networking equipment 1 pduv15 safe, reliable power distribution for critical networking equipment 1 pdumh15 metered pdu / power distribution unit - safe, reliable power distribution with digital current meter 1 pdumv15 metered pdu / power distribution unit - safe, reliable power distribution with digital current meter 1 pdumh15at metered pdu with ats - power distribution unit with dual-input auto transfer switching 1 pdumnh15 monitored pdu / power distribution unit supports real-time remote monitoring of load level, voltage and frequency with options for remote environmental and security monitoring 1 pdumnv15 monitored pdu / power distribution unit supports real-time remote monitoring of load level, voltage and frequency with options for remote environmental and security monitoring 1 pdumh15atnet switched, metered pdu with ats - power distribution unit with dual-input auto transfer switching, individual outlet control and remote network interface 1 pdumv15net switched, metered pdu with remote monitoring - 0u vertical rackmount power distribution unit for networks with individually switchable outlets, current metering, remote monitoring and control 1 p007-002 2-ft. heavy-duty 14awg power cord (iec-320-c13 to nema 5-15p) 1 p007-006 6-ft. heavy-duty 14awg power cord (iec-320-c13 to nema 5-15p) 1 p007-010 10-ft. heavy-duty 14awg power cord (iec-320-c13 to nema 5-15p) 1 p010-012 12-ft. 18awg power cord (nema 5-15p to iec-320-c13) 1 p022-001 1-ft. 18awg power extension cord (nema 5-15r to nema 5-15p) 1 p023-001 1-ft. 14awg power adapter cord (nema l5-15r to nema 5-15p) 1 p034-010 10-ft. 14awg heavy duty power cord ( iec-320-c19 to nema 5-15p) 1 more information, including related products, owner's manuals, and additional technical specifications, can be found online at: http://www.tripplite.com/sku/SMART1500CRMXL . ? 2014 tripp lite. all rights reserved. all trademarks are the sole property of their respective owners. tripp lite has a policy of continuous improvement. specifications are subject to change without notice. photos may differ slightly from final products. 6 / 6
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: tripp lite: ? SMART1500CRMXL
|
